會員中心 | En | 繁體

英制開槽半沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 3] BS 450 - 1958

☆ 收藏

選擇規格尺寸點擊↓

1/8

3/16

7/32

1/4

5/16

3/8

尺寸單位: inch

英標BS 450 - 1958 BS450 450BS 英制開槽半沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 3]

在線制圖

BS 450 - 1958 英制開槽半沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 3]

掃一掃分享

單重計算公差最小破壞扭矩牌號等級

螺紋尺寸
d

1/8

3/16

7/32

1/4

5/16

3/8

d
PP	牙數/英寸	B.S.W.
		B.S.F.
d_k	理論值
	最大值
	最小值
k	最大值
f	公稱
n	最大值
	最小值
t	公稱

0.1250	0.1875	0.2188	0.2500	0.3125	0.3750
40	24	/	20	18	16
/	32	28	26	22	20
0.237	0.356	0.415	0.475	0.594	0.712
0.219	0.328	0.383	0.438	0.547	0.656
0.201	0.307	0.36	0.412	0.518	0.624
0.056	0.084	0.098	0.113	0.141	0.169
0.026	0.040	0.044	0.051	0.068	0.080
0.039	0.050	0.055	0.061	0.071	0.082
0.032	0.042	0.046	0.051	0.061	0.072
0.047	0.071	0.083	0.095	0.120	0.144

同版本產品組 (13)

BS 450 - 1958

英制開槽半沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 3]

BS 450 - 1958

英制開槽沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 2]

BS 450 - 1958

BSW/BSF 開槽盤頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 5]

BS 450 - 1958

英制開槽大扁頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 8]

BS 450 - 1958

英制開槽圓柱頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 6]

BS 450 - 1958

英制精制六角螺母 - B.S.W. & B.S.F. 螺紋 [Table 10]

BS 450 - 1958

英制六角頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 9]

BS 450 - 1958

英制十字槽沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 2]

BS 450 - 1958

英制十字槽大扁頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 8]

BS 450 - 1958

英制十字槽盤頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 5]

BS 450 - 1958

英制十字槽球面圓柱頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 7]

BS 450 - 1958

英制開槽圓頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 4]

BS 450 - 1958

英制十字槽半沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 3]

引用參考 (14)

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

緊固件 - 螺栓、螺釘和螺柱 - 公稱長度和螺紋長度 (ISO 888:2012, MOD)

GB /T 3 - 1997

普通螺紋收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 5779.3 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求

GB /T 3105 - 2002

普通螺栓和螺釘 - 頭下圓角半徑

GB /T 34632 - 2017

統一螺紋搓制和滾制前的毛坯直徑

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 3098.25 - 2020

緊固件機械性能不銹鋼和鎳合金緊固件選用指南

螺栓、螺釘和螺柱性能等級及常用牌號及近似牌號（按GB/T3098.1-2010相關規定選擇）粗牙螺栓、螺釘?shù)臄Q入深度、攻絲深度和鉆孔深度非合金鋼和低合金鋼和鑄鋼的硬度值轉換表

注：技術數據僅供參考，請以官方原件為準！

類似標準及供貨信息 (40)

1	[國標] GB /T 69 - 2016	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(1)
2	[國標] GB /T 69 - 2000	開槽半沉頭螺釘 Countersunk Slotted Raised Head Screws (Common Head Style) 供應商(1)
3	[國標] GB 69 - 1985	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(1)
4	[國標] GB 949 - 1988	開槽半沉頭不脫出螺釘 Slotted Raised Countersunk Head Screws with Waisted Shank
5	[美標] IFI 513 - 1982	米制開槽半沉頭機械螺釘 Table 4 Metric Slotted Oval Countersunk Head Machine Screws
6	[德標] DIN 964 - 1990	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(3)
7	[德標] DIN 924 - 2024	開槽半沉頭圓柱端螺釘 Slotted Raised Countersunk Head Screws with Dog Point
8	[德標] DIN 924 - 2012	開槽半沉頭圓柱端螺釘 Slotted Raised Countersunk Head Screws with Dog Point
9	[德標] DIN 924 - 2006	開槽半沉頭圓柱端螺釘 Slotted Raised Countersunk Head Screws with Dog Point
10	[國際] ISO 2010 - 2011	一字槽半沉頭螺釘(普通頭型).產品等級A Slotted Raised Countersunk Head Screws - Product Grade A 供應商(1)
11	[國際] ISO 2010 - 1994	開槽半沉頭螺釘(通用頭型) 產品等級A級 Countersunk Slotted Raised Head Screws (common head style) - Product Grade A 供應商(1)
12	[日標] JIS B 1101 (T10) - 2017	開槽半沉頭螺釘表10 Slotted Raised Countersunk Head Screws - Table 10
13	[日標] JIS B 1101 (JA5) - 2017	開槽半沉頭螺釘附表JA.5 Slotted Raised Countersunk Head Screws - Table JA.5
14	[日標] JIS B 1116 (T5) - 2009	精密機械用開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws for Fine Mechanics
15	[日標] JIS B 1101 (AT4) - 1996	開槽半沉頭螺釘表4 [Attached Table 4] Slotted Raised Countersunk Head Screws [Attached Table 4]
16	[日標] JIS B 1101 (AAT3) - 1996	開槽半沉頭螺釘附表3 [Annex Attached Table 3] Slotted Raised Countersunk Head Screws [Annex Attached Table 3]
17	[日標] JIS B 1119 (1CFC) - 1986	眼鏡框架用 - 開槽倒角半沉頭螺釘 Spectacle Frames - Slotted Chamfered Flat Countersunk Machine Screws
18	[日標] JIS B 1119 (1RFC) - 1986	眼鏡框架用 - 開槽弧面半沉頭螺釘 Spectacle Frames - Slotted Round Flat Countersunk Machine Screws
19	[美標] ASME/ANSI B 18.6.3 - 2010	開槽半沉頭螺釘Table7 Slottted Oval Countersunk Head Machine Screws
20	[美標] ASME/ANSI B 18.6.3 (T11) - 2010	80°開槽半沉頭清根螺釘Table11 80° Slotted Undercut Oval Countersunk Head Machine Screws
21	[美標] ASME/ANSI B 18.6.7M - 1998	米制開槽半沉頭螺釘Table6 Metric Slotted Raised Countersunk Head Screws
22	[法國] NF E 25-124 - 1994	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws - Product Grade A
23	[法國] NF F 03-004 (FB) - 1983	鐵路車輛半沉頭側切口機械螺釘 Railway Rolling Stock Grade A Raised Countersunk Notched Head Machine
24	[法國] NF F 03-006 (slot) - 1983	鐵路車輛 A級開槽半沉頭螺釘/螺母 Railway Rolling Stock Grade A Slotted Raised Countersunk Head Screws/Nuts
25	[法國] NF F 03-006 (notch) - 1983	鐵路車輛 A級沉頭側切口螺釘/螺母 Railway Rolling Stock Grade A Notched Raised Countersunk Head Screws / Nuts
26	[英標] BS 1981 - 1991	開槽半沉頭螺釘(短的)Table10 Slottted Oval Countersunk Head Screws： Short Length
27	[英標] BS 1981 - 1991	開槽半沉頭螺釘Table8 Slotted Raised Countersunk Head Machine Screws
28	[英標] BS 4183 (T3) - 1967	開槽半沉頭機械螺釘 Slotted Raised Countersunk Head Machine Screws. Metric Series
29	[臺灣] CNS 9679 - 1982	精密機械用開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws for Fine Mechanics
30	[臺灣] CNS 4414 - 1981	開槽半沉頭螺釘 Slotted Raised Countersunk (Oval) Head Screws
31	[俄標] GOST 17474 - 1980	開槽半沉頭螺釘 A級和B級 Raised Countersunk Head Screws (Slotted), Product Grades A and B
32	[韓標] KS B 1021 (T6) - 2012 (R2022)	開槽半沉頭螺釘 [Table 6] Slotted Raised Countersunk Head Screws [Table 6]
33	[德標] DIN EN ISO 2010 - 1994	開槽半沉頭螺釘(通用頭型) - 產品等級A級 Slotted Raised Countersunk Head Screws (Common Head Style) - Product Grade A 供應商(3)
34	[美標] ASME B 18.6.3 (H2A) - 2024	82° 開槽半沉頭機械螺釘(ASTM F837/F468) [TABLE 2.2.2-1] 82° Slotted Oval Countersunk Head Machine Screws (ASTM F837/F468) [TABLE 2.2.2-1]
35	[美標] ASME B 18.6.3 (H3C) - 2024	82° 開槽半沉頭清根機械螺釘 (ASTM F837/F468) [TABLE 2.2.3-3] 82° Slotted Undercut Oval Countersunk Head Machine Screws (ASTM F837/F468) [TABLE 2.2.3-3]
36	[美標] ASME B 18.6.3 (T7) - 2013	82° 開槽半沉頭機械螺釘 [Table 7] (ASTM F837 / F468) 82° Slotted Oval Countersunk Head Machine Screws [Table 7] (ASTM F837 / F468)
37	[美標] ASME B 18.6.3 (T11) - 2013	82° 開槽半沉頭清根機械螺釘 [table 11] (ASTM F837 / F468) 82° Slotted Undercut Oval Countersunk Head Machine Screws [table 11] (ASTM F837 / F468)
38	[航天] QJ 2388 - 1992	開槽半沉頭螺釘 Slotted Countersunk Raised Head Screws
39	[航空] HB 1- 209 - 1995	90°開槽半沉頭螺釘 90° Countersunk Slotted Raised Head Screws
40	[澳標/新西蘭標] AS/NZS 1427 - 1996	米制開槽半沉頭螺釘 [Table 2] ISO Metric Slotted Raised Countersunk Head Screws [Table 2]

標準編號 / Standard Code： BS 450 - 1958
中文名稱 / Chinese Name： 英制開槽半沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 3]
英文名稱 / English Name： Slotted 90° Raised-Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 3]
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page

Data Source: YJT Fastener Database (164580.com)
Standard: BS 450 - 1958
Chinese Name: 英制開槽半沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 3]
English Name: Slotted 90° Raised-Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 3]
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.

成人精品在线91,九九在线播放,五月天Av在线,欧美日韩午夜亚洲88,久久久久久国产高清,91福利专区,日韩人妻码一区观看,啪啪啪国产三区,在线女人国产

英制開槽半沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 3] BS 450 - 1958

同版本產品組 (13)

引用參考 (14)

類似標準及供貨信息 (40)