欧美一级日韩二级网站,青青九草在线观看,九九热视频在线观看色

相關產品與標準及供貨信息

DIN 1472 - 1978 槽銷半長錐槽 Grooved Pins, Half Length Taper Grooved

DIN EN ISO 8745 - 1998 槽銷半長錐槽 Grooved Pins, Half-Length Taper Grooved

GB /T 13829.2 - 2004 槽銷帶倒角及全長平行溝槽 Grooved Pin, Full Length Parallel Grooved with Chamfer

GB /T 13829.3 - 2004 槽銷中部槽長為1/3全長 Grooved Pins-One-Third-Length Centre Grooved

GB /T 13829.1 (B) - 1992 B型-帶倒角及全長平行溝槽槽銷. Grooved Pins-full-length Parallel Grooved, with Chamferw

GB /T 13829.1 (C) - 1992 C型-中部帶1/3全長平行溝槽的槽銷 Grooved Pins-one-third-length Centre Grooved

DIN 1471 - 1978 槽銷全長錐槽 Grooved Pins, Full Length Taper Grooved

DIN EN ISO 8744 - 1998 槽銷—全長錐槽 Groovd Pins - Full-Length Taper Grooved

GB /T 13829.1 - 2004 槽銷帶導桿及全長平行溝槽 Grooved Pin, Full Length Parallel Grooved with Pilot

GB /T 13829.5 - 2004 槽銷全長錐槽 Groovd Pins-Full-Length Taper Grooved

GB /T 13829.6 - 2004 槽銷半長錐槽 Grooved Pins - Half-Length Taper Grooved

GB /T 13829.8 - 2004 圓頭槽銷 Grooved Pins with Round Head

GB /T 13829.1 (A) - 1992 A型-帶導桿及全長平行溝槽的槽銷. Grooved Pin, Full Length Parallel Grooved with Pilot

GB /T 13829.2 (A) - 1992 A型-錐槽的槽銷 Grooved Pins-taper Grooved, A-style

GB /T 13829.2 (B) - 1992 B型-半長錐槽的槽銷 Grooved Pins-half-length Taper Grooved

GB /T 13829.3 (A) - 1992 圓頭槽銷 Grooved Pins - with Round Head

DIN 1473 - 1978 帶倒角及全長平行溝槽的槽銷 Grooved Pins, Full Length Parallel Grooved with Chamfer

DIN 1475 - 1978 槽銷，中部槽長為1/3全長 Grooved Pins - 1/3 Length Centre Grooved

DIN 1476 - 1978 圓頭槽銷 Round Head Grooved Pins

ISO 8740 (RN) - 2025 帶倒角及全長平行溝槽槽銷-倒圓端 ? Pin with chamfered point and rounded ends (RN)

ISO 8744 (RN) - 2025 槽銷—全長錐槽倒圓端 Taper Grooved Pins - Full-length Progressive Grooves - Pin with Rounded Ends (RN)

ISO 8745 (RN) - 2025 半長錐槽的槽銷倒圓端 Taper Grooved Pins - Half-length Progressive Grooves - Pin with Rounded Ends (RN)

ISO 8746 - 2025 圓頭槽銷 Grooved Pins with Round Head - Full-length Diamond Grooves

ISO 8740 - 1997 帶倒角及全長平行溝槽槽銷 Grooved Pins-Full-Length Parallel Grooved, with Chamfer

ISO 8744 - 1997 槽銷—全長錐槽 Groovd Pins-Full-Length Taper Grooved

ISO 8745 - 1997 B型-半長錐槽的槽銷 Grooved Pins-Half-Length Taper Grooved

ISO 8746 - 1997 圓頭槽銷 Grooved Pins with Round Head

ISO 8746 - 1986 圓頭槽銷 Grooved Pins with Round Head

DIN EN ISO 8740 - 1998 帶倒角及全長平行溝槽的槽銷 Grooved Pins. Full-Length Parallel Grooved, with Chamfer

DIN EN ISO 8742 - 1998 槽銷，中部帶1/3全長平行溝槽 Grooved Pins - 1/3 Length Centre Grooved

DIN EN ISO 8746 - 1998 圓頭槽銷 Grooved Pins with Round Head

GB /T 13829.4 - 2004 槽銷中部槽長為1/2全長 Grooved Pins - Half-Length Centre Grooved

GB /T 13829.7 - 2004 槽銷半長倒錐槽 Grooved Pins-Half-Length Reverse-Taper Grooved

GB /T 13829.1 (D) - 1992 D型中部帶1/2全長平行溝槽的槽銷 Grooved Pins - Half-length Centre Grooved

GB /T 13829.2 (C) - 1992 C型-半長倒錐槽的槽銷 Grooved Pins-half-length Reverse-taper Grooved

DIN 1469 - 2012 帶頸配合槽銷，溝槽長為全長1/2 Grooved Pins, Half Length Grooved with Gorge

DIN 1469 - 2011 帶頸配合槽銷 Grooved Pins, Half Length Grooved with Gorge

DIN 1469 - 1978 帶頸配合槽銷 Grooved Pins, Half Length Grooved with Gorge

DIN 1470 - 1978 帶導桿及全長平行溝槽的槽銷 Grooved pin, full length parallel grooved with pilot

ISO 8742 (RN) - 2026 中部帶1/3全長平行溝槽的槽銷，圓頭端 Grooved Pins-One-Third-Length Centre Grooved - Pin with Rounded Ends (RN)

ISO 8739 (RN) - 2025 帶導桿及全長平行溝槽, 倒圓端 Pin with Pilotpoint and Rounded Ends

ISO 8741 (RN) - 2025 半長倒錐槽的槽銷-倒圓端 Reverse-taper Grooved Pins - Half-length Progressive Grooves - Rounded Ends

ISO 8739 - 1997 槽銷—帶導桿及全長平行溝槽 Grooved Pins-Full-Length Parallel Grooved, with Pilot

ISO 8741 - 1997 半長倒錐槽的槽銷 Grooved Pins - Half-length Reverse Taper Grooved

ISO 8742 - 1997 中部帶1/3全長平行溝槽的槽銷 Grooved Pins-One-Third-Length Centre Grooved

DIN EN ISO 8739 - 1998 帶導桿及全長平行溝槽的槽銷 Grooved Pin, Full Length Parallel Grooved with Pilot

DIN 1474 - 1978 槽銷,半長倒錐槽 Grooved Pins-Half-Length Reverse-Taper Grooved

ISO 8742 (CH) - 2026 槽銷，中部帶1/3全長平行溝槽，倒角端 Grooved Pins-One-Third-Length Centre Grooved - Pin with Chamfered Ends (CH)

ISO 8743 (RN) - 2026 中部帶1/2全長平行溝槽的槽銷 RN Grooved Pins-Half-Length Centre Grooved - Pin with Rounded Ends (RN)

ISO 8743 (CH) - 2026 中部帶1/2全長平行溝槽的槽銷 CH Grooved Pins-Half-Length Centre Grooved - Pin with Chamfered Ends (CH)

ISO 13670 (RN) - 2025 倒錐形槽銷 - 兩側1/4長度漸變槽 - 圓端 Reverse-taper Grooved Pins - One Quarter-length Progressive Grooves on Both Sides, Pin with Rounded Ends

ISO 13670 (CH) - 2025 倒錐形槽銷 - 兩側1/4長度漸變槽 - 帶倒角端 Reverse-taper Grooved Pins - One Quarter-length Progressive Grooves on Both Sides, Pin with Chamfered Ends

ISO 13672 (RN) - 2025 槽銷半長平行溝槽末端倒圓 Parallel Grooved Pins - Half-length Diamond Grooves - Rounded Ends

ISO 13672 (CH) - 2025 槽銷半長平行溝槽末端倒角 Parallel Grooved Pins - Half-length Diamond Grooves - Chamfered Ends

ISO 8739 (CH) - 2025 帶導桿及全長平行溝槽, 倒角端 Pin Pilot Point and with Chamfered Ends

ISO 8740 (CH) - 2025 帶倒角及全長平行溝槽槽銷-倒角端 Pin with Both Chamfered Points (CH)

ISO 8741 (CH) - 2025 半長倒錐槽的槽銷-倒角端 Reverse-taper Grooved Pins - Half-length Progressive Grooves - Chamfered Ends

ISO 8744 (CH) - 2025 槽銷—全長錐槽倒角端 Taper Grooved Pins - Full-length Progressive Grooves - Pin with Chamfered Ends (CH)

ISO 8745 (CH) - 2025 半長錐槽的槽銷-倒角端 Taper Grooved Pins - Half-length Progressive Grooves - Pin with Chamfered Ends (CH)

ISO 8743 - 1997 中部帶1/2全長平行溝槽的槽銷 Grooved Pins-Half-Length Centre Grooved

ASME/ANSI B 18.8.100M (B18.8.9M T5) - 2000 (R2005) 米制半長溝槽槽銷 TYPE 43-1 / TYPE 43-2 [TABLE 5] Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5]

ASME/ANSI B 18.8.100M (B18.8.9M T7) - 2000 (R2005) 米制半長錐槽槽銷 TYPE 45 [Table 7] Grooved Pins with Half-length Taper Grooved, Metric Series, TYPE 45 [Table 7]

ASME/ANSI B 18.8.100M (B18.8.9M T6) - 2000 (R2005) 米制全長錐槽槽銷 Type 44 [Table 6] Metric Series, Grooved Pins with Full-length Taper Grooved, Type 44 [Table 6]

ASME/ANSI B 18.8.100M (B18.8.9M T3) - 2000 (R2005) 米制全長平行溝槽槽銷 TYPE 39 / TYPE 40 [Table 3] Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3]

ASME/ANSI B 18.8.100M (B18.8.9M T8) - 2000 (R2005) 米制圓頭槽銷 TYPE 46-1 TYPE 46-2 [Table 8] Metric Series, Grooved Pins with Round Head, TYPE 46-1 TYPE 46-2 [Table 8]

ASME/ANSI B 18.8.100M (B18.8.9M A) - 2000 (R2005) 米制半長倒錐溝槽槽銷 TYPE 41 Metric Grooved Pins - Half-length Reverse-taper Grooved, TYPE 41

ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) 米制中部槽長1/3全長 平行溝槽槽銷 TYPE 42 [TABLE 4] Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4]

ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) 米制中部帶1/2全長 平行溝槽槽銷 TYPE 43 [TABLE 4] Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4]

EN 28740 - 1992 槽銷全長平行溝槽帶倒角 Full-Length Parallel Grooved, with Chamfer

EN 28741 - 1992 槽銷，半長倒錐槽 Grooved Pins - Half-length Reverse-taper Grooved

EN 28743 - 1992 中部帶1/2全長平行溝槽的槽銷 Grooved Pins - Half-Length Centre Grooved

EN 28746 - 1992 圓頭槽銷 Grooved Pins with Round Head

NF E 25-772 - 1997 (R2002) 帶倒角及全長平行溝槽的槽銷 Grooved Pins. Full Length Paralled Grooved, with Chamfer

NF E 25-766 - 1997 圓頭槽銷 Grooved Pins with Round Head

NF E 25-750 - 1997 中部帶1/2全長平行溝槽的槽銷 Grooved Pins. Half Length Centre Grooved

NF E 25-761 - 1997 槽銷帶導向的全長平行槽 Grooved Pins - Full-length Parallel Grooved, With Pilot

NF E 25-762 - 1997 圓錐銷半長溝槽 Grooved Pins. Half-Length Reverse-Taper Grooved

NF E 25-763 - 1997 (R2002) 中部帶1/3全長平行溝槽的槽銷 Grooved Pins. One-Third-Length Centre Grooved

NF E 25-764 - 1997 (R2002) 槽銷全長錐槽 Grooved Pins-Full-Length Taper Grooved

NF E 25-765 - 1997 槽銷半長錐槽 Grooved Pins - Half-Length Taper Grooved

SAE J 494 (A) - 2004 A型槽銷 Grooved Straight Pins - Type A

SAE J 494 (B) - 2004 B型槽銷 Grooved Straight Pins - Type B

SAE J 494 (C) - 2004 C型槽銷 Grooved Straight Pins - Type C

SAE J 494 (D) - 2004 D型槽銷 Grooved Straight Pins - Type D

SAE J 494 (E) - 2004 E型槽銷 Grooved Straight Pins - Type E

SAE J 494 (F) - 2004 F型槽銷 Grooved Straight Pins - Type F

DIN EN ISO 8741 - 1998 槽銷，半長倒錐槽 Grooved Pins - Half-length Reverse-Taper Grooved

DIN EN ISO 8743 - 1998 槽銷中部槽長為1/2全長 Grooved Pins - Half-Length Centre Grooved

EN ISO 8741 - 1997 半長倒錐槽的槽銷 Grooved Pins - Half-length Reverse-taper Grooved

EN ISO 8743 - 1997 中部帶1/2全長平行溝槽的槽銷 Grooved Pins - Half-Length Centre Grooved

IS 7386 - 2005 半長倒錐槽的槽銷 Grooved Pins - Half-length Reverse Taper Grooved

ASME B 18.8.2 - 2020 F型全長槽銷 [Table 8-1] Grooved Pins - Type F

ASME B 18.8.2 - 2020 H型半長槽銷 [Table 8 -1] Grooved Pins - Type H

ASME B 18.8.2 - 2020 G型槽銷 [Table 8 -1] Grooved Pins - Type G

ASME B 18.8.2 - 2020 E型槽銷半長錐槽 [Table 8 -1] Grooved Pins - Type E

ASME B 18.8.2 - 2020 A型槽銷全長錐槽 [Table 8 -2] Grooved Pins - Type A

ASME B 18.8.2 - 2020 圓頭槽銷 [Table 8-2] Round Head Grooved Drive Studs

ASME B 18.8.2 - 2000 (R2010) H型半長槽銷 [Table 6] Grooved Pins - Type H

ASME B 18.8.2 - 2000 (R2010) E型槽銷半長錐槽 [Table 6] Grooved Pins - Type E

ASME B 18.8.2 - 2000 (R2010) A型槽銷全長錐槽 [Table 6] Grooved Pins - Type A